Description
The large reducer allows you to optimise the water flow on your rain chain
The reducers offered for our rain chains are designed to channel the water flow. They are adapted to our rain chain models and are necessary if the outlet diameter of your gutter is much larger than that of the chain. This large reducer is intended for use on a gutter outlet with a minimum diameter of 100mm. The reducer is necessary if you have a 100mm gutter outlet and you have chosen cups with a diameter between 75mm and 100mm.
The large reducer is equipped with a fixing screw to position the rain chain
Dimensions: diameter= 75mm tube length=90mm base=195*115 mm
This model is suitable for gutters with flat bottoms (e.g. square, moulded gutters, …..). We recommend adding a silicone seal inside the gutter around the base of the reducer. Our reducers are very easy to install: just place them at the bottom of your gutter.
If you have an existing gutter opening, you can simply slide the reducer into it and you will not need any tools or DIY skills.
You will find other models in the accessories section. For example the model for half round gutters