Half Round Copper Reducer

Description

The half-round base reducer, the solution to optimise water circulation on your rain chain

Copper half round base reducer for half round section gutter.

The reducers offered for our rain chains are designed to channel the water flow. They are adapted to our rain chain models and are necessary if the outlet diameter of your gutter is much larger than the chain diameter. In general, the outlet diameter of a gutter is 80 mm. If you have chosen a rain chain with a diameter smaller than 80 mm we recommend the use of our reducers.

Dimensions: diameter = 48 mm, tube length = 70 mm, base = 83*122 mm

This model is suitable for half-round gutters. If the surface condition is not satisfactory inside the gutter, we recommend adding a seal inside the gutter around the base of the reducer. Our reducers are very easy to install, just place them at the bottom of your gutter.

If there is an existing gutter opening, you can simply slide the reducer into it and no special tools or DIY skills are required.

You will find other models in the accessories section. For example: the model for flat-bottomed gutters.

In case the 83*122mm base size is not sufficient to cover your opening diameter, we provide an adapter to use the reducer on all types of gutters: 80, 100, and 120mm. If you need this adapter, please let us know when ordering.

Join us on Facebook by visiting our Rain Chain page! We regularly post information, news, publications on our new models and promotional operations.